2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 43Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 43

Center Crankcase Components NOTE: This procedure cannot be done with the enginetransmission in the frameComplete Removing
screws3Using the Crankcase SeparatorCrankshaft Remover (pn 0444-009) and tapping lightly with rubber mallet, separate the
crankcase halvesAccount for two alignment pinsNOTE: To keep the shaftgear assemblies intact for identification, tap the shafts
toward the right-side crankcase half when separating the halves KEY ASecondary Driven Shaft Assembly BCrank Balancer Gear
CCrankshaft Gear DCountershaft Assembly EDriveshaft FReverse Idler Gear Assembly GGear Shift Shaft HShift Shaft with Forks
CC821B NOTE: To aid in installing, it is recommended that the assemblies are kept together and IN ORDER 1Remove the secondary
driven shaft assembly (A) noting the location of the bearing locating pinsAccount for the bearing C-ring 2Remove the reverse