2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 46Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 46

CleaningInspecting Valve Cover NOTE: If the valve cover cannot be trued, the cylinder head assembly must be replaced 1Wash
or damage to the camshaft will resultAlways check camshaft clearance when resurfacing the valve cover NOTE: The valve seals
must be replaced 3Remove the valve springs; then invert the cylinder head and remove the valvesMeasuring Valve Stem Runout
! CAUTION Water or parts-cleaning solvent must be used in conjunction with the wet-or-dry sandpaper or damage to the sealing
surface may result 1Support each valve stem end with the Blocks (pn 0644-022); then check the valve stem runout using dial
indicator Removing Valves NOTE: Keep all valves and valve components as setNote the original location of each valve set for
use during installationReturn each valve set to its original location during installation 1Using valve spring compressor,