2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 51Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 51

! CAUTION Water or parts-cleaning solvent must be used in conjunction with the wet-or-dry sandpaper or damage to the sealing
readingMaximum trueness (out-of-roundness) must not exceed specificationsCC141D CleaningInspecting Cylinder 1Wash the cylinder
in parts-cleaning solvent2Inspect the cylinder for pitting, scoring, scuffing, warpage, and corrosionIf marks are found,
repair the surface using cylinder hone (see Honing Cylinder in this sub-section)3Place the cylinder on the surface plate
covered with #400 grit wet-or-dry sandpaperUsing light pressure, move the cylinder in figure eight motionInspect the sealing
surface for any indication of high spotsA high spot can be noted by bright metallic finishCorrect any high spots before assembly
by continuing to move the cylinder in figure eight motion until uniform bright metallic finish is attained 2Wash the cylinder