2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 54Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 54

DRIVEN PULLEY ASSEMBLY Disassembling ! WARNING This procedure involves relaxing compressed spring assemblyDO NOT attempt
housing is damaged in any way, the housing must be replacedINSPECTING PRIMARY ONE-WAY DRIVE 1Insert the drive into the clutch
housing2Rotate the inner race by hand and verify the inner race rotates only one direction3If the inner race is locked in
place or rotates both directions, the drive assembly must be replacedINSPECTING OIL PUMP 2Place the driven pulley assembly
onto the compressor tool base engaging the dowel pins into appropriate holes in the fixed face of the assembly 1Inspect the