2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 56Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 56

10Using thin pry-bar or screwdriver, work the movable face sleeve upward and free of the O-rings; then remove the sleeve
or crackingAssembling 1Place the fixed face of the driven pulley on the pulley compressor base making sure the dowel pins
are engaged in the appropriate holes in the pulley faceNOTE: Make sure the spacer is on the base or damage to the fixed face
will occur when the spring is compressed Inspecting 1Inspect the pulley faces for wear, galling, or grooving2Inspect the