2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 59Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 59

4Install the secondary driven output shaft assembly5Rotate the secondary driven bevel gear several revolutions in both directions6Examine
at Root Shim Correction Decrease Shim Thickness Increase Shim Thickness NOTE: To correct tooth contact, steps and (with NOTE)
of "Correcting Backlash" must be followed and the above "Tooth ContactShim Correction" chart must be consulted ! CAUTION
ATV-0103 After correcting tooth contact, backlash must again be checked and corrected (if necessary)Continue the correcting
backlashcorrecting tooth contact procedures until they are both within tolerance values CRANKSHAFT ASSEMBLY Measuring Connecting