2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 64Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 64

NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs 6From the right side, install the remaining
Rotate the shafts back and forth to ensure no binding or sticking occursCD994 2Install the secondary shaft bearing housing
making sure the two alignment pins are properly positionedTighten the Allen-head screws securely 10In crisscrosscase-to-case
pattern, tighten the mm cap screws (from steps 7-8) to specificationsNOTE: Rotate the shafts back and forth to ensure no
binding or sticking occurs AT THIS POINT After completing center crankcase components, proceed to Installing Left-Side Components,
to Installing Right-Side Components, and to Installing Top-Side ComponentsCD999 Installing Left-Side Components 1Install
the shift indicator sending unit making sure the two neutral contact pins and the two springs are properly positionedTighten