2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 71Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 71

BInstall the compression rings (1 and 2) so the letter on the top surface of each ring faces the dome of the pistonRotate
then remove the piston holder and seat the cylinder firmly on the crankcase ! CAUTION ATV-1024A ! CAUTION Incorrect installation
of the piston rings will result in engine damage The cylinder should slide on easilyDo not force the cylinder or damage to
the piston, rings, cylinder, or crankshaft assembly may occur 1Install the piston on the connecting rod making sure there
is circlip on each side and the open end of the circlip faces upwardsNOTE: The piston should be installed so the arrow points
toward the exhaust 4Loosely install the two nuts which secure the cylinder to the crankcaseNOTE: The two cylinder-to-crankcase