2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 74Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 74

19Rotate the crankshaft until the first cap screw (from step 17) can be addressed; then tighten to specificationsBend the
screw (threads coated with red Loctite #271) securing the sprocket and tab-washer to the camshaftTighten only until snug
20Place the C-ring into position in its groove in the cylinder head 21Install the cylinder head plug in the cylinder head
with the open end facing downward and toward the inside 18Rotate the crankshaft until the second cap screw securing the sprocket