2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 75Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 75

22Remove the cap screw from the end of the chain tensioner; then using flat-blade screwdriver, rotate the adjuster screw
assembly and gasket into position on the cylinder and secure with the two Allen-head cap screws 26Apply thin coat of Three
Bond Sealant to the mating surfaces of the cylinder head and valve cover 24Using flat-blade screwdriver, rotate the adjuster
screw inside the tensioner counterclockwise until all tension is released; then install the cap screw into the end of the
chain tensionerCC275D 27Place the valve cover into positionNOTE: At this point, the rocker arms and adjuster screws must