2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 76Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 76

29In crisscross pattern starting from the center and working outward, tighten the cap screws securely30Adjust valvetappet
valve adjuster handle with one of the marks on the valve adjuster dialEWhile holding the valve adjuster handle in place,
rotate the valve adjuster dial counterclockwise until specified valvetappet clearance is attainedNOTE: Rotating the valve
adjuster dial counterclockwise will open the valvetappet clearance by 0.05 mm (0.002 in per mark 1Attach suitable lifting
chains to the enginetransmission; then using an engine hoist, lower the assembly into the engine compartment ! WARNING Keep
hands and fingers clear when lowering the enginetransmission into placeThe chains could shift causing severe injury ! CAUTION
Make sure that all wiring, hoses, and brake lines are routed away from engine mounts and engine bracketsPinching or breaking
of lines or shorting of wiring could occur FWhile holding the adjuster dial at the proper clearance setting, tighten the