2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 77Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 77

NOTE: The rear engine mounting bracket and rear engine mounts should be attached to the engineThe front engine mounting bracket
be aligned (timed) or damage will occur to the universal joints and gears 5Install the cap screws securing the drive-line
couplers to the drive flanges and tighten to specifications 6Set the exhaust pipe in place; then install the muffler and
align the assembly to the engineInstall two cap screws securing the exhaust pipe to the cylinder head and tighten to specificationsPR147
4Apply multi-purpose grease to the driveshaft splines; then align the flange marks and slide the splines into the slip-joints3-52