2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 85Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 85

INSTALLING 1Place the carburetor into position on the engine; then connect the electric choke connector to the main harness2Connect
the diaphragm is not properly seated, leakage will occur 8Place the jet needle, spring seat, and spring into the vacuum piston;
then place the assembly down into the carburetor Engine RPM (Idle) To adjust idle RPM, see Section 2 Gas Tank ! WARNING 9Place
the top cover into position; then secure with the Phillips-head screwsTighten securely Whenever any maintenance or inspection
is made on the fuel system during which there may be fuel leakage, there should be no welding, smoking, open flames, etc
in the area REMOVING 1Remove the seats and center console; then remove the left-side and right-side seat-bases2Remove twelve