2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 96Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 96

3Fill the enginetransmission with the proper amount of recommended oil4Fill the cooling system with the proper amount of
securely Vacuum Pulse Fuel Pump AT THIS POINT Prior to removing the vacuum pulse fuel pump, the following test should be
performed to determine that removal is necessary 2Remove the two machine screws and flange nuts securing the fuel pump to
the electrical tray; then remove the pumpINSTALLING 1Place the fuel pump into position on the electrical tray; then secure
with the machine screws and flange nutsTighten securely2Connect two gas hoses and one vacuum hose; then secure with the clamps
! WARNING Whenever any maintenance or inspection is made on the fuel system during which there may be fuel leakage, there
should be no welding, smoking, open flames, etc in the area Fuel Level Sensor REMOVING TESTING 1Disconnect the fuel pumpcarburetor