2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 97Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 97

2Remove the gasline hose and disconnect the fuel level sensor connector; then remove four torx-head machine screws and the
when the fuel level sensor is held verticallyIf there is binding or sticking, replace the fuel level sensor3Test the fuel
level sensor by connecting multimeter (A) to the fuel level sensor connector (B); then select OHMS on the multimeterThe multimeter
should read ohms of resistance at "full fuel" position (C) and 95 ohms at the "empty fuel" position (D) 1Using new seal,
place the fuel level sensor into position in the gas tank; then secure the fuel level sensor mounting plateTighten the four
torx-head machine screws securely2Connect the fuel level sensor connector to the main harness; then install the gasline hose