2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 105Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 105

Differential Lock Switch (XT) VOLTAGE Reverse Override Switch VOLTAGE NOTE: To perform the following tests, the ignition
to the redyellow wireThe meter must show approximately 1.5 DC voltsDepress the reverse override switchThe meter must show
approximately 1.5 DC volts6Connect the red meter lead to the redgreen wireThe meter should show DC volts7Depress the reverse
override switchThe meter must show approximately DC volts 3Select the lock position on the differentialThe meter should drop
to volts, and the front drive actuator should operate to engage 4-wheel driveNOTE: It may be necessary to rock the vehicle
slightly to engage the differential lock fullyNOTE: The 4WD and LOCK icons in the upper-left corner of the LCD should illuminate
Front Drive Selector Actuator NOTE: With the engine stopped and the ignition switch in the ON position, momentary "whirring"
sound must be noticeable each time the selector switch is moved to 2WD and 4WDTest the switch, 30 amp fuse, and wiring connections