2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 114Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 114

7Secure the wiring harness to the frame with nylon cable tie; then install the inner fender panel Front Differential REMOVING
vehicle is solidly supported on the jack stands to avoid injury 2Remove the drain plug and drain the gear lubricant into
drain pan; then install the plug 9On the XT, remove two cap screws securing the differential lock cable support; then disconnect
the differential lock cable at the differential 3Remove the front wheels4Set the parking brake; then turn the ignition switch
to the ON position and select 4WD on the 2WD4WD selector switch5Remove the cotter pin securing the hex nut; then remove the