2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 115Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 115

13Remove the lower shock boltsAccount for the lock nuts; then move the shocks and upper A-arm up and secure them with strap
drive flange and the front drive yoke flange; then remove three cap screws securing the yoke and flangeSeparate the flanges
but do not remove the driveshaft 11Pull the steering knuckle away from the axle taking care not to damage the seals with
the axle endPR198A 15Using slide hammer, remove the front axles 12Support the axle to not allow it to drop or hang ! CAUTION