2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 121Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 121

738-268B ACover Sideadd value on the gear case housing to value (XT) or value (Prowler) on the gear case cover; then add
shim until backlash specification range can be verified4Prior to final assembling, apply molybdenum disulfide grease to all
oil seal lips5Prior to final assembling, prelubricate journal on pinion assembly with SAE 80W-90 hypoid gear lubricant prior
to pressing assembly into gear case housingAssembling Pinion Gear 3Install the pinion gear assembly into the housingUsing
the 48 mm Internal Hex Socket (pn 0444-104), secure the pinion gear assembly with the existing lock collarTighten to specificationsNOTE:
On front differential, the lock collar has right-hand threadsOn rear gear case, the lock collar has left-hand threads 1Install