2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 122Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 122

5Install the shift fork shaft wspring into the gear housing making sure the shaft O-ring is positioned to the inside 6Install
the ring gearInstall the ring gear in the housing; then install the outside shim with the chamfer side of the shim toward
the ring gearNOTE: The spider and ring gear assembly must be replaced as complete unit 7Place the input shaft assembly onto
the gear housing; then secure with the existing cap screwsTighten to specificationsNOTE: If new gear housing is being installed,