2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 125Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 125

4Pour 275 ml (9.3 fl oz) of SAE 80W-90 hypoid lubricant into the differential and install the filllevel plugTighten to specifications5Align
Drive Axles in this section)7Install the knuckle assemblies onto the axles and ball joints; then secure with four cap screws
taking care not to damage the threads when installingTighten to specifications 5Repeat steps 1-4 for the opposite sideINSTALLING
DIFFERENTIAL 1Place the differential assembly into position in the frame; then install the top mounting through-bolt, two
washers, and lock nutDo not tighten at this time2Install the lower front mounting through-bolt, washers, spacers, and lock