2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 126Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 126

14Remove the vehicle from the support stand15Install the belly panel Drive Axles REMOVING REAR DRIVE AXLE 1Secure the vehicle
stand to avoid injury 2Set the parking brake; then remove the wheels3Remove the cotter pins securing the hex nuts; then remove
the hex nuts 11Connect the front drive actuator connector to the main harness and the differential lock indicator connector
to the differential; then secure the wires to the frame with nylon ties12Apply light coat of multi-purpose grease to the
hub splines; then install the hubs and nutsTighten to specifications; then install new cotter pins 4Slide the hub out of