2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 140Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 140

Suspension NOTE: Critical torque specifications are located in Section 10 Shock Absorbers REMOVING 1Secure the vehicle on
shock absorber to the frame and upper A-armAccount for bushings and sleeves from each CLEANING AND INSPECTING ! CAUTION Additional
support stands are necessary to support the rear axle when the shock absorbers are removed or damage may occur NOTE: Whenever
part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Clean all shock absorber components in
parts-cleaning solvent2Inspect each shock rod for nicks, pits, rust, bends, and oily residue3Inspect all springs, spring
retainers, shock rods, sleeves, bushings, shock bodies, and eyelets for cracks, leaks, and bendsINSTALLING 3Remove the two