2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 141Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 141

2Place bushings and sleeves (where appropriate) into shock eyelet; then install shock with two cap screws and nutsTighten
then remove the tie rod end from the knuckle7Remove the cap screws securing the ball joints to the knuckle Front A-Arms REMOVING
1Secure the vehicle on support stand to elevate the front wheels; then remove the wheels ! CAUTION Support the knuckle when
removing the cap screws or damage to the threads will occur ! WARNING Make sure the vehicle is solidly supported on the support
stand to avoid injury 2Remove the cotter pin from the nutDiscard the cotter pinPR193 8Tap the ball joints out of the knuckle;