2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 142Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 142

10Remove the cap screws securing the A-arms to the frame AF616D 11Remove the circlip from the ball joint; then remove the
the A-arm for bends, cracks, and worn bushings4Inspect the ball joint mounting holes for cracks or damage5Inspect the frame
mounts for signs of damage, wear, or weldment damageINSTALLING 4Secure the lower eyelet of the shock absorber to the upper
A-armTighten nut to specifications5Secure the A-arm assemblies to the frame mounts (from step 2)Tighten the cap screws to
specifications ! CAUTION Do not tighten the nut beyond the 4.8 kg-m (35 ft-lb) specification or the shock eyelet or mount
WILL be damaged 1Apply green Loctite #609 to the entire outside diameter of the ball joint; then install the ball joint into