2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 145Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 145

9Secure the boot guard to the lower A-arm with the two cap screwsTighten securely10Install the wheel and tighten to specifications11Remove
PRESSURE KEY: 1Machine Screw 2Brake Disc 3Wheel Hub 4Hub Stud 5Cotter Pin Front and rear tire inflation pressure should be
0.70 kgcm (10 psi)678910Castle Nut Wheel Mounting Nut TireFront Valve Stem 11121314Valve Stem Cap Wheel TireRear Wheel Cap
REMOVING 1Secure the vehicle on support stand to elevate the wheels 0741-724 ! WARNING Make sure the vehicle is solidly supported
on the support stand to avoid injury 2Remove the wheels KEY 12345 Machine Screw Brake Disc Wheel Hub Hub Stud Cotter Pin
Castle Nut Wheel Mounting Nut TireFront Valve Stem 11Valve Stem Cap 12Wheel 13TireRear 0740-489 CD006 CLEANING AND INSPECTING