2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 148Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 148

SteeringFrame NOTE: Critical torque specifications are located in Section 10 4Remove the cap screw securing the lower steering
two nuts and two washers 2Remove the cotter pins and nuts securing the tie rod ends to the knuckles; then remove the tie
rod ends from the knuckles 6Remove the rack and pinion assembly from the right-side 3Make matching alignment marks on the
pinion shaft and lower steering shaft joint INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any
way, replacement is necessary NOTE: Any time steering components are disassembled, all connecting components should be marked