2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 152Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 152

Steering Shaft Assembly REMOVING 1Remove the steering wheel (see Steering Wheel in this section)2Remove the six torx-head
components for reassemblingNOTE: Any time steering components are disassembled, all connecting components should be marked
for proper alignment during reassembling INSPECTING NOTE: The steering shaft assembly is not repairable or rebuildableIf
any damage or excessive wear is detected, the assembly must be replaced 4Remove the cap screw securing the upper steering
shaft joint to the steering wheel shaft; then slide the steering wheel shaft free of the upper steering shaft jointAccount