2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 159Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 159

Floor REMOVING 1Remove the seats and center console2Remove twelve cap screws and two self-tapping screws securing the floor
for cracks or holesINSTALLING 1Place the front of the floor into position in the vehicle first; then lower the rear and push
past the seat lock studsPR163 2Secure the floor with twelve cap screws and two self-tappings screws3Install the center console
and seats making sure the seats lock securely into position Belly Panel REMOVING 1Remove the body screws securing the belly
panel to the underside of the framePR164 4From the opposite side of the vehicle repeat step 3; then lift the rear of the