2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 160Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 160

Exhaust System REMOVING MUFFLER 1Remove the two exhaust springs at the mufflerexhaust pipe juncture 2Loosen but do not remove
or an adequate lift, remove the cargo box from the vehicleAccount for four pivot housingsCLEANING AND INSPECTING NOTE: Whenever
part is worn excessively, cracked, or damaged in any way, replacement is necessary INSTALLING MUFFLER 1Place the muffler
onto the holder pins and slide forward into position2Secure the muffler to the exhaust pipe with the two exhaust springs
1Clean all cargo box components with soap and water2Inspect the cargo box for cracks, tears, and loose hardware3Inspect the
welds of the cargo box frame for cracking or bending4Inspect the cargo box gate latches for smooth operation Cargo Box REMOVING