2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 162Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 162

INSTALLING 1Connect the three-prong connector to the bulb socket; then place the taillight assembly into position on the
replacement is necessary REMOVINGINSTALLING 1To remove seat, pull the seat lock lever upRaise the front of the seat and slide
it forward2To install seat, slide the rear of the seat into the seat retainers and push down firmly on the front of seatThe
seat should automatically lock into position 1Inspect wiring harness, three-prong connector, lens, base, cap screws, and