2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 166Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 166

2Select the 2WD position on the 2WD4WD selector switch; then turn the ignition switch to the ON position and select the LOCK
run and cannot be reset to zeroTo set the clock, use the following procedureAWith the ignition switch in the ON position,
press and release the Mode Button (3) until the ClockEngine Hour Meter (1) is displayed; then (if necessary) press and release
the SetReset Button (4) to the clock displayBPress and hold the SetReset Button (4) until the minutes stop scrolling and
the hour display starts to scrollMomentarily release when the correct hour is displayed; then repeatedly press and release
the SetReset Button (4) until the correct minutes are displayedNOTE: Approximately two seconds after releasing either Button,
the LCD will return to normal operation INSTALLING 1With the shifter spring in place on the shift lever, install the shift
lever onto the shifter axle2Install the shoulder screw and secure with the flange nutTighten to specifications (see Section