2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 4Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 4

FILLING GAS TANK 1Clean the seat cushion (cover and base) with damp cloth and allow to dry2Clean the ATV thoroughly by washing
to its rated capacity onlyExpansion room must be maintained in the tank particularly if the tank is filled with cold gasoline
and then moved to warm area 4Drain the carburetor float chamber5Plug the hole in the exhaust system with clean cloth6Apply
light oil to the upper steering post bushing and plungers of the shock absorbers7Tighten all nuts, bolts, cap screws, and
screwsMake sure rivets holding components together are tightReplace all loose rivetsCare must be taken that all calibrated
nuts, cap screws, and bolts are tightened to specifications (see Section 10)8Disconnect the battery cables (negative cable
first); then remove the battery, clean the battery posts and cables, and store in clean, dry area ! WARNING Do not over-fill
or overflow gasoline when filling the gas tankA fire hazard could materializeAlways allow the engine to cool before filling