2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 14Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 14

Engine Oil 1Move the ATV outdoors and start and warm up the engineShut the engine off; then place drain pan under the engine
the oil drain plug and tighten securely3Move the drain pan to the right-front of the engine and remove the oil screenfilter
capAccount for screen, spring, and O-ring 6Start and warm up the engine7Shut the engine off and allow to stand for 2-3 minutes8Remove
the oil level stick and wipe with clean clothKM040A 9Insert the oil level stick until the threads touch the engineNOTE: The
oil level stick should not be threaded into the engine for checking the oil 10Remove the oil level stick; the engine oil