2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 16Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 16

Ignition Timing The ignition timing cannot be adjusted; however, verifying ignition timing can aid in troubleshooting other
and welds should be checked periodically for damage, bends, cracks, deterioration, broken components, and missing componentsIf
replacement or repair constitutes removal, see Section 8 Brakelight Each time the ATV is used, the brakelight should be checked
for proper functionRotate the ignition switch to the ON position and compress both brake leversThe brakelight should illuminateTo
replace the brakelight bulb, use the following procedure1Remove the two screws and remove the lens cover2Remove the bulb
by pushing it in and turning it counterclockwise3Install the new bulb by pushing it in and turning it clockwise4Install the
lens cover Electrical Connections The electrical connections should be checked periodically for proper functionIn case of
an electrical failure, check fuse, connections (for tightness, corrosion, damage), andor bulbIf an electrical component needs