2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 20Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 20

NOTE: If the drive belt has an arrow stamped on the outer face, it should point forward (direction of rotation) 5Place the
(see Section 10) 6Tighten the cover cap screws to specifications (see Section 10)7Install the cooling duct8Place the footrest
cover into position and secure it to the footrest with the Phillips-head cap screwsTighten to specifications (see Section
10)9Secure the footrest cover to the front and rear fenders with the Phillips-head cap screws and four cap screwsTighten
to specifications (see Section 10) 4Rotate the drive belt and sheaves until the drive belt is flush with the top of the driven