2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 43Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 43

DSC02217 DSC02227 6Install two O-rings, one alignment pin, and the oil pump on the right-side crankcase half; then secure
9Install new gasket and two dowel pins on the right-side crankcase halfNOTE: The two contact surfaces must be clean before
installing the gasketDSC02226 7Install the oil pump sprocket with the nutTighten the nut to specifications 10Install the
eight cap screws to the right-side crankcase coverApply red Loctite #271 on the cap screws and tighten to specificationsNOTE:
Note the correct position for the different-lengthed cap screws that they are installed in the proper locations ! CAUTION