2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 52Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 52

44Spread the faces of the driven pulley by grasping the outer driven face tightly and pulling out away from the base (toward
assemblySecure with the flange nut tightened to specifications DSC02307 DSC02314 46Install the starter motor into the left-side
crankcaseTighten the two cap screws to specifications DSC02308 49Pinch the belt together near mid-span and slide the fixed
drive face over the crankshaftInstall the drive face, cooling fan, ratchet, and washer; then apply red Loctite #271 to the