2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 53Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 53

52Install the cylinder shroud seal DSC02315 DSC02322 53Install the bottom cylinder shroud with one cap screw together with
screws to the cylinder shroudDSC02317 DSC02326 DSC02318 50Rotate the drive belt and faces until the belt is flush with the
top of the driven pulley51Place two alignment pins, gasket, and the V-belt cover into position; then secure with the eight
cap screws tightened to specifications 55Place the exhaust pipe and gasket into position on the cylinder and secure with