2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 60Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 60

2Install the main jet by threading it into the jet holder; then install the jet holder into the carburetorTighten both components
arm tabCD604 3Install the pilot screw with spring and O-ringNOTE: thin application of lightweight oil will help to seat the
O-ring properlyCD615 6Install the float chamber seal NOTE: Turn the pilot screw clockwise until it is lightly seated; then
turn it counterclockwise the recommended number of turns as an initial setting 7Place the float chamber into position making