2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 62Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 62

REMOVING 1Turn the fuel valve to the OFF position2Remove the gas hose from the carburetor by removing the spring clamp; then
6Carefully lay the handlebar assembly forward on the front fender panelNOTE: To access the gas tank, it is necessary to move
the front fender panel, which requires removing the handlebar from its clampHowever, the levers, controls, cables, and wires
do not need to be disconnectedThe front fender panel and handlebar assembly can be tilted forward far enough to gain access
to the gas tank Gas Tank ! WARNING Whenever any maintenance or inspection is made on the fuel system during which there may
be fuel leakage, there should be no welding, smoking, open flames, etc in the area 7Remove the four Phillips-head cap screws