2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 64Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 64

REMOVINGINSPECTING ! WARNING Drain the gas tank prior to this procedure 1Remove the cap screw securing the valve to the frame;
aging may not always be visibleDo not bend or obstruct the routing of the carburetor vent hoseMake certain that the vent
hose is securely connected to the carburetor and the opposite end is always open In the OFF position, the valve will not
allow gasoline to flow to the carburetorIn the ON position (the normal operating position), gasoline will flow from the tank
to the carburetorIn this position, 1.3 (0.34 U.Sgal of gasoline will remain in the tank as reserve quantityMoving the valve
to the RES position will allow the operator to use the remaining gasoline in the tankWhen turning the valve to any of the
three positions, be sure the indicator is pointed directly at the position desired Oil Pump Assembly For complete servicing