2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 78Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 78

REMOVING AXLE HOUSING 1Secure the ATV on support stand to elevate the rear wheels ! WARNING Make sure the ATV is solidly
necessary (see Removing Rear Hub Drive Axle in this sub-section)NOTE: Do not remove more components than necessary to perform
the intended serviceThe axle housing will separate from the swing arm with all components attached if necessary 3Inspect
seals for tears, cracks, or deterioration4Inspect splines on axle for damage or wear5Inspect threads on end of axle for damage
or stripped threads6Inspect axle for straightness by rolling it on flat surface and checking for wobble7Inspect axle housing
for dents or warpage that might interfere with bearing bore or alignmentINSTALLING BEARINGS AND SEALS 4Remove the four cap