2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 86Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 86

2Remove the cotter pin, castle nut, and washer; then remove the hub assembly MD2132 8Remove the cap screws and self-locking
the cotter pin and flanged castle nut from the spindle pinLower the steering knuckle assembly from the A-armCLEANING AND
INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Clean all A-arm
components in parts-cleaning solvent2Clean the tie rod mounting hole of all residual Loctite, grease, oil, or dirt for installing
purposes3Inspect the A-arm for bends, cracks, and worn bushings 7Remove the cap screw and self-locking nut securing the shock