2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 87Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 87

4Inspect the tie rod mounting holes for cracks or damage5Inspect the frame mounts for signs of damage or wearINSTALLING NOTE:
Do not tighten the nut beyond the 4.0 kg-m (29 ft-lb) specification or the shock eyelet or mount WILL be damaged 5Apply light
coat of grease to spindle shaft; then install the brake backing plate assembly onto the shaftNOTE: When installing the brake
backing plate assembly, be sure to align the notch in the backing plate with the tab on the steering knuckle 3Lubricate the
steering knuckle assembly with grease; then install it into the A-arm and secure with the flanged castle nutTighten the nut
to specifications; then install new cotter pin and the rubber spindle pin boot 6Place the hub assembly onto the spindle;