2008 Arctic Cat 366 ATV Service Manual, Page 6Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 6

FILLING GAS TANK 1Clean the seat cushion (cover and base) with damp cloth and allow it to dry2Clean the ATV thoroughly by
expands as its temperature rises, the gas tank must be filled to its rated capacity onlyExpansion room must be maintained
in the tank particularly if the tank is filled with cold gasoline and then moved to warm area 5Plug the exhaust outlet on
the muffler with clean cloth6Apply light oil to the upper steering post bushing and plungers of the shock absorbers7Tighten
all nuts, bolts, cap screws, and screwsMake sure rivets holding components together are tightReplace all loose rivetsCare
must be taken that all calibrated nuts, cap screws, and bolts are tightened to specifications8Turn the gas tank valve to
the OFF position9Disconnect the battery cables; then remove the battery, clean the battery posts and cables, and store in
clean, dry area10Store the ATV indoors in level position ! WARNING Do not overflow gasoline when filling the gas tankA fire
hazard could materializeAlways allow the engine to cool before filling the gas tank Tighten the gas tank cap securely after