2008 Arctic Cat 366 ATV Service Manual, Page 25Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 25

2Slide the auxiliary brake pedal part way off the pivot stud but do not remove; then remove the cap screws from the V-belt
assembly being careful not to let the roller fall outAccount for bushing 5Pinching the V-belt together in front of the driven
pulley, pull it forward and outward off the clutch shaft; then remove it from the driven pulley KC136 KC127 6Inspect the
faces of the drive and driven pulleys for scoring, pitting, cracks, or grooving; then clean any dirt and debris from the