2008 Arctic Cat 366 ATV Service Manual, Page 36Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 36

8Remove the front and rear V-belt cooling boots from the V-belt housing9Remove the cap screws from the front and rear output
to removed from the frame for this procedure Removing Top-Side Components AValve CoverRocker Arms BCylinder HeadCamshaft
NOTE: Remove the spark plug, timing inspection plug, and outer magneto cover; then using an appropriate wrench, rotate the
crankshaft to top-dead-center of the compression strokeNOTE: Arctic Cat recommends the use of new gaskets, lock nuts, and
seals and lubricating all internal components when servicing the enginetransmission 10Lift the rear of the enginetransmission
and swing to the right; then tilt the assembly sufficiently to remove through the right-side frame opening 1Remove the cap