2008 Arctic Cat 366 ATV Service Manual, Page 38Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 38

6Using an awl, rotate the C-ring in its groove until it is out of the cylinder head; then remove the C-ringNOTE: Care should
holding the cam chain, slide the sprocket and camshaft out of the cylinder headAccount for an alignment pinNOTE: Loop the
chain over the cylinder and secure it with wire to keep it from falling into the crankcase 10Remove the cylinder head from
the cylinder, remove the gasket, and account for two alignment pins AT THIS POINT To service valves and cylinder head, see
Servicing Top-Side Components sub-section 11Remove the cam chain guideMD1132 8Remove the cam chain tensioner by lifting it