2008 Arctic Cat 366 ATV Service Manual, Page 44Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 44

ATV-1069 ATV-1085B Measuring Piston Skirt Cylinder Clearance 1Measure the cylinder front to back in six places 2Install the
then install the thin oil rings (3) over the expander making sure the expander ends do not overlapStagger the end gaps of
the upper and lower thin oil rings according to the illustrationNOTE: Note the direction of the exhaust side of the piston
(5) for correct ring end gap orientation MD1343A ! CAUTION Incorrect installation of the piston rings will result in engine
damage CYLINDERCYLINDER HEAD ASSEMBLY NOTE: If the cylindercylinder head assembly cannot be trued, they must be replaced
CleaningInspecting Cylinder Head ! CAUTION The cylinder head studs must be removed for this procedure 1Using non-metallic
carbon removal tool, remove any carbon buildup from the combustion chamber being careful not to nick, scrape, or damage the